What is smart lighting and what are its advantages?

Release Time:

2022-11-21 09:48

In short, intelligent lighting is a distributed wireless telemetry, remote control and telecommunication control system composed of computer technology, wireless communication technology, spread spectrum power carrier communication technology, computer intelligent information processing technology, energy-saving electrical control technology, etc., to realize the intelligent control of lighting equipment. Common forms of intelligent lighting are: lighting brightness level, lighting soft start, timing control switch, scene settings and other scenes.

What are the advantages of smart home lighting: 1. Compared with traditional lighting, smart lighting can achieve automatic dimming. For example, the intelligent lighting system can set several basic states, can automatically adjust each other according to the preset time, and can intelligently adjust the illumination to the appropriate gear. After installing the intelligent lighting system, the natural light source will be fully utilized. Natural light can be regulated by smart devices with light control functions, and can also be linked with the lighting system. When the weather changes, the system will automatically adjust to keep the indoor lighting stable. Usually, when designing a new building, lighting designers should consider one thing, that is, the efficiency of the lamps and the attenuation of the reflectivity of the room wall over time. Therefore, the initial illuminance value will be designed to be higher. This design not only causes the inconsistency of illumination in the same period of time, but also brings the fearless waste of electric energy. After using intelligent lighting, although the initial value is still high, because of the intelligent dimming function, the system will maintain the stable illumination of the space according to the preset standard brightness. 4. The light environment scene can also be intelligently converted, and different scenes are preset. If necessary, just operate on the corresponding operation panel. You can also use the interface with a portable programmer to change settings in different scenarios. 5, good versatility. The intelligent lighting system can intelligently dim most of the lamps, set sufficient lighting in the required space and time period, and turn off unnecessary lamps in time, make full use of natural light, and reduce the power consumption and power supply pressure of the owner. Intelligent lighting will also extend the life of the light source. The main reason for the damage of the light source is the overvoltage of the power grid. As long as the operating voltage is appropriately reduced, the life of the light source can be extended. The intelligent lighting control system adopts a soft start method, which can control the surge voltage and surge voltage of the power grid to protect the filament from thermal shock, thereby extending its life.

Why can't smart lighting be quickly popularized? 1, price. At present, the use of intelligent lighting design is relatively small, or the number of users is relatively small, because of its high price. If you want to use smart lighting, you need to buy a complete system, including operating system, software, lamps and light sources. The technical threshold for installation and maintenance is relatively high. The installation and wiring of intelligent lighting systems is much more complicated than the traditional lighting fixtures and wiring methods that have been used for decades or hundreds of years, and it is a relatively new operation for lighting designers and construction personnel. 3, follow-up self-maintenance difficulties. Once there is an abnormal situation, it is not as simple as changing the lamp holder and changing the bulb. The popularity of any advanced technology is always spread among a small group of people. In the future, with the gradual standardization, simplification and popularization, we look forward to intelligent lighting into the homes of ordinary people!